Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Monthly database reset

Created by: Dh_1811 at: 8/16/2013 2:53 PM (1 Replies)

Rating (0)

Thanks 1

2 Entries

8/16/2013 2:53 PM	Rate (0)
Dh_1811 Posts: 24 Rating: (0)	Hi, I am creating a SCADA that will collect data(i.e KWh) from a pac3200 onto the tia portall v11. With the information being collected in the tia portal, I am usingWincc todisplay it as a report every month. I have managed to complete this step, however I would like that my database could reset every month. In doing sothereports will then allow me to see a comparision of energy being used. Could anyone guide me on to how I would proceed. Dh_1811
Dh_1811 Posts: 24 Rating: (0)
Suggestion To thank Quote Answer

8/19/2013 2:06 PM	Rate (0)
Tweety Posts: 3037 Rating: (192)	Hello, See the chapter 6 and 7. http://support.automation.siemens.com/WW/view/en/72927729?Datakey=47069298 Tweety
Tweety Posts: 3037 Rating: (192)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Dh_1811

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Prof Archives / Recipes

Follow us on