Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Export project texts for translation

Created by: sba at: 8/12/2013 3:21 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

8/12/2013 3:21 PM	Rate (0)
sba Advanced Member Joined: 3/22/2012 Last visit: 8/4/2025 Posts: 6 Rating: (0)	Hello, I'm trying to export project texts from a TP1500 Comfort panel from english to French for translation. I Always get an error message ''The applicatio has encountered a problem and needs to close" Cananybody tell me how to export the project textsto an exel file? Thank you

Suggestion To thank Quote Answer

8/12/2013 4:20 PM	Rate (0)
Tweety Posts: 3037 Rating: (192)	Hello, Have a look in the link. https://www.automation.siemens.com/mdm/default.aspx?DocVersionId=54122797195&Language=en-US&TopicId=43921166731 Tweety
Tweety Posts: 3037 Rating: (192)
Suggestion To thank Quote Answer

8/21/2013 2:50 PM	Rate (0)
sagsage Posts: 9 Rating: (0)	I also have this exact same problem - any solutions?
sagsage Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

8/22/2013 1:47 PM	Rate (0)
Tweety Posts: 3037 Rating: (192)	Hello, Do you check this link for export project texts for translation? https://www.automation.siemens.com/mdm/default.aspx?DocVersionId=54122797195&Language=en-US&TopicId=43921166731 You do not change the source language in excel. Tweety
Tweety Posts: 3037 Rating: (192)
Suggestion To thank Quote Answer

8/22/2013 10:09 PM	Rate (0)
G74x Posts: 47 Rating: (4)	I'm already make a post here about the same problem win WinCC TIA read it and maybe it'll work. /tf/WW/en/Posts/95700#top Regards
G74x Posts: 47 Rating: (4)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Installation Options General

Follow us on