Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

replace encoder

Created by: A.Pasandi at: 2/17/2013 7:53 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

2/17/2013 7:53 PM	Rate (0)
A.Pasandi Experienced Member Joined: 12/22/2010 Last visit: 11/17/2025 Posts: 99 Rating: (0)	Dear all, I want replace encoder ERN1387. inside Siemens Servo motor and simo drive 611. How I can tune motor and new encoder by simodrive 611? Thank you

Suggestion To thank Quote Answer

2/17/2013 8:34 PM	Rate (0)
Jefke Advanced Member Joined: 9/15/2009 Last visit: 12/4/2025 Posts: 25 Rating: (0)	is it on a servo motor like 1FK.. or 1FT... or is it on an asynchronious motor like 1PH... asynchroneous motor: build on the encoder and done, withservo-motor: with external powersupply set motor on 0° electrical, with measuring device for encoder (like HH PWM9), set encoder on refpoint and then mount encoder on motor

Suggestion To thank Quote Answer

9/6/2013 12:38 AM	Rate (0)
Blue Moderator Platinum Member Joined: 4/21/2006 Last visit: 1/27/2025 Posts: 510 Rating: (24)	New question was splitted to a new thread: replace encoder ERN 1387 on motor 1FK704

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on