Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Can LOGO use for light dimmer? or control the bright of a light?

Created by: jonjon13 at: 10/27/2013 2:48 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

10/27/2013 2:48 AM	Rate (0)
jonjon13 Posts: 77 Rating: (1)	Hi I just want to know if LOGO unit can control the brightness of light or a dimmer? Thank you. Jonjon
jonjon13 Posts: 77 Rating: (1)
Suggestion To thank Quote Answer

10/27/2013 8:36 AM	Rate (0)
Toeternietoe Platinum Member Joined: 12/27/2006 Last visit: 11/17/2025 Posts: 1200 Rating: (116)	Yes, but only... when your lightsdimmer have an input of 0 (2)-10Volt or 0(4)-20mA to controll the brightness. The LOGO! has NO output for that controll, you have to buy an extra LOGO extensionunit, type AM 2AQ

Suggestion To thank Quote Answer

10/28/2013 8:13 AM	Rate (0)
Helmut_13 Posts: 2930 Rating: (432)	Hi, a nother possibility is to use dimmer. Depending on the time thes switch ON/OFF or change the brightness of the lamps. Google max help. Regards Helmut
Helmut_13 Posts: 2930 Rating: (432)
Suggestion To thank Quote Answer

11/1/2013 10:49 PM	Rate (0)
elektryk Posts: 4 Rating: (0)	You can switch some dimmer predefined setting with relays. If your dimmer hasn't analog input but some kind of know, it is internally connected to potentiometer. You can emulate some predefined potentiometer settings with external resistors which will be switched by relays.
elektryk Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on