Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

control solenoids

Created by: guri1054 at: 10/30/2013 11:10 PM (3 Replies)

Rating (0)

Thanks 2

4 Entries

10/30/2013 11:10 PM	Rate (0)
guri1054 Posts: 8 Rating: (0)	need to control three solenoids each with a duration of 3 seconds which act alternately from 1 to 3 after finishing the third is going to stop for 8 hours and perform the same cycle. a challenge for you.
guri1054 Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

10/31/2013 11:45 AM	Rate (0)
Helmut_13 Posts: 2930 Rating: (432)	Hi, no, the challenge is at your side. You need to solve it.
Helmut_13 Posts: 2930 Rating: (432)
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Marcjan Ste39

11/2/2013 5:01 AM	Rate (0)
guri1054 Posts: 8 Rating: (0)	This may be the idea ... but as I can improve ... so that between each action of the solenoid has a time of 3 seconds and at the end of the third solenoid, make a reseso for 8 hours and restart the sequence .... Attachment I made ... I'm sorry I'm learning .... Attachment PURGA DE TANQUES.zip (282 Downloads)
guri1054 Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

11/4/2013 6:24 AM	Rate (0)
guri1054 Posts: 8 Rating: (0)	improved, with alarm and cycle control ..... if you can do more simplified. be welcome .... Attachment PURGA DE TANQUES 2.zip (300 Downloads)
guri1054 Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on