Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

hwID to hw_IO

Created by: v.kerstholt at: 11/13/2013 10:25 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

11/13/2013 10:25 AM	Rate (0)
v.kerstholt Posts: 58 Rating: (9)	fbWriteAsi needs a hw_io now instead of a hwID. is there a function to get the hw_io form a hwID?
v.kerstholt Posts: 58 Rating: (9)
Suggestion To thank Quote Answer

11/13/2013 12:40 PM	Rate (0)
Marcjan Diamond Member Joined: 4/22/2010 Last visit: 3/31/2025 Posts: 5697 Rating: (716)	hello, Perhaps you could explain a bit more in details the system you have and the problem. regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

11/13/2013 4:16 PM	Rate (0)
TomDeWou Platinum Member Joined: 11/15/2006 Last visit: 3/26/2025 Posts: 1319 Rating: (176)	v.kerstholt fbWriteAsi needs a hw_io now instead of a hwID. is there a function to get the hw_io form a hwID? Check the extended instructions > Adressing. There are GEO2LOG, LOG2GEO etcand RD_LGADR, which determins the I/O addresses from the hardware ID.
	Have Fun! TomDeWou
Suggestion To thank Quote Answer

11/15/2013 11:50 AM	Rate (0)
v.kerstholt Posts: 58 Rating: (9)	thanks. thats what i needed
v.kerstholt Posts: 58 Rating: (9)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on