Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

simodrive 611 alarm E-6607

Created by: kmichcnc at: 12/14/2013 7:50 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

12/14/2013 7:50 AM	Rate (0)
kmichcnc Posts: 3 Rating: (0)	Ocean Drillbeamline Simodrive 611 Machines drives had no power had a company come in and rebuild the amp. Ok so now I have power to drives. On the 2nd drive I get an erorr E-6607. Checked the dip switches they are correct. On screen I get the alarms. 380500 Profibus-DP: fault of drive Y1 code 607 25201 Axis Y1 drive fault restarted machine and I get 25201 Axis X1 drive fault 26101 Axis X1 drive 1 communications failure. (this one wont go away) was thinking machine needs to be zero'd anyone have a drive alarm list link?
kmichcnc Posts: 3 Rating: (0)	Last edited by: kmichcnc at: 12/14/2013 8:09 AM
Suggestion To thank Quote Answer

12/15/2013 6:00 AM	Rate (0)
PISCEAN 2010 Diamond Expert Joined: 4/23/2010 Last visit: 11/23/2024 Posts: 8092 Rating: (883)	Hello, Please check your machine data as well connector plugs of 611 drive. Refer the attached sheet. Hope this helps you. Attachment Alarm 25201, 26101.pdf (516 Downloads)

Suggestion To thank Quote Answer

12/18/2013 9:16 AM	Rate (0)
kmichcnc Posts: 3 Rating: (0)	Today I was able to solve with the cable dip switches and think temp change had something to do with drive problems. Thoughts on keeping the machine on during the winter months. Also beginning to look at my data and will be sure to back it up. Thank you
kmichcnc Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on