Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

CP 1613 A2

Created by: Logan512 at: 8/10/2007 11:08 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

8/10/2007 11:08 AM	Rate (0)
Logan512 Posts: 1 Rating: (0)	Hi, Can i program a S7 - 300 CPU ( 315 2dp ) with an industrial PC rack il43 with a cp1613A2 ? This CP have a AUI ang a RJ45 port. Can you tell me the cable i need ( or the layout of this cable )and witch port i have to use ???? Thanks ! See you !
Logan512 Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

8/10/2007 12:07 PM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 12/24/2025 Posts: 9097 Rating: (1202)	Hi, It's only possible if S7-300 has an ethernet interface. This could be a CP343-1 or a CPU with integrated PN interface. When you have a CPU315-2DP it isn't possible , unless you have CP343-1 ethernet communication card. The cable you have to use iscan be aCross cable. Best regards, Wizard

Suggestion To thank Quote Answer

8/12/2007 9:31 PM	Rate (0)
J_Bell Posts: 5822 Rating: (412)	Hello, to connect two nodes with eachother you have to use a Corss over cabel. Best regards J_Bell
J_Bell Posts: 5822 Rating: (412)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on