Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

V12 and S7-200

Created by: keith.brainard at: 2/4/2014 9:22 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

2/4/2014 9:22 PM	Rate (0)
keith.brainard Posts: 3 Rating: (0)	I have a fresh copy of STEP 7 TIA V12 SP1 Update 3, with the support packages from the hardware catalog (from options...support packages in TIA). I can hook up to modern processors like the 1511 I have here, but I was trying to hook up to one of the older S7-200 processors we have, and my software doesn't recognize it. Under Controllers, I have a group for S7-300, S7-400 and ET 200 CPUs, but no S7-200. I'm not skilled enough with the web site here to find the correct support package. Can someone direct me to the right hardware support package to enable communication with the S7-200? Thanks Keith
keith.brainard Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

2/4/2014 10:08 PM	Rate (0)
0_Einstein Grandmaster-Expert Joined: 7/7/2010 Last visit: 12/31/2025 Posts: 16342 Rating: (2521)	keith.brainard I have a fresh copy of STEP 7 TIA V12 SP1 Update 3, with the support packages from the hardware catalog (from options...support packages in TIA). I can hook up to modern processors like the 1511 I have here, but I was trying to hook up to one of the older S7-200 processors we have, and my software doesn't recognize it. Under Controllers, I have a group for S7-300, S7-400 and ET 200 CPUs, but no S7-200. I'm not skilled enough with the web site here to find the correct support package. Can someone direct me to the right hardware support package to enable communication with the S7-200? Thanks Keith MicroWIN is required for the S7-200.
	science guy
Suggestion To thank Quote Answer

2/4/2014 10:16 PM	Rate (0)
keith.brainard Posts: 3 Rating: (0)	I take it MicroWIN is a different software package I can't download, but would have to buy? That is disappointing... Thanks
keith.brainard Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

2/5/2014 3:49 AM	Rate (0)
0_Einstein Grandmaster-Expert Joined: 7/7/2010 Last visit: 12/31/2025 Posts: 16342 Rating: (2521)	[quote user="keith.brainard"]I take it MicroWIN is a different software package I can't download, but would have to buy? That is disappointing... Thanks Are you simply trying to communicate with the s7-200 using s7-300/400/1200/1500? Then you may be able to use the get/put setup to transfer information/data between the various processors. If you want to program the (now) end-of-life product, the s7-200, you will still need the microwin software as it been for some time. There should be no disappointment in no support for end-of-life products as it was announced several years ago. I hope you find a solution that makes things work as needed.
	science guy
Suggestion To thank Quote Answer

2/5/2014 7:40 AM	Rate (0)
IBN-Service Posts: 8946 Rating: (1000)	keith.brainard I take it MicroWIN is a different software package I can't download, but would have to buy? ... Yes.
IBN-Service Posts: 8946 Rating: (1000)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on