Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Connection problems IPC477D

Created by: Hebo at: 2/21/2014 2:10 PM (4 Replies)

Rating (0)

Thanks 1

5 Entries

2/21/2014 2:10 PM	Rate (0)
Hebo Posts: 6 Rating: (0)	Hello, We have a problem with a IPC 477D We made a project in TIA portal. And had no problems downloading it to the IPC. But now when we have the screens downloaded we cant not see values. The only thing the screen shows us it # # # when we simulate the program on our PG we have no such troubles. Is there some settings we might do wrong? thanks in advance
Hebo Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

2/21/2014 2:27 PM	Rate (0)
taxflor Silver Member Joined: 1/26/2011 Last visit: 11/12/2024 Posts: 243 Rating: (67)	Hello, seems to be a setting problem with your PC/PG interface. What interface have you selected on your IPC? best regards, bigfoot

Suggestion To thank Quote Answer

2/24/2014 1:30 PM	Rate (0)
Hebo Posts: 6 Rating: (0)	Hello, We are using ethernet to do this. And the PG doesnt have any problems to connect with the screen in the netwerk. Only when we want to display the values from the plc to the screen it doesnt work. We are using a S7-300 plc. Is there some specific settings in the 477d that we need to change so the ipc sees the values from the s7-300? regards,
Hebo Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

2/24/2014 1:33 PM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 1/9/2026 Posts: 9104 Rating: (1202)	Hello Hebo, Please give us information about the PG/PC interface (IPC477D)? Best regards, Wizard

Suggestion To thank Quote Answer

2/24/2014 2:03 PM	Rate (0)
Hebo Posts: 6 Rating: (0)	Hello, We just fixed the problem, we dont know exacly why but when we deleted the 447d in the network. and the added it again it make connection and we can see the values. also my collegue changed the interface to tcp/ip. this was most likely the problem we had. thanks for the help. Kind regard,
Hebo Posts: 6 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Wizard

|

Share this page:

Share this page on...

Follow us on