Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Undo while Online

Created by: schnek at: 3/21/2014 1:15 PM (2 Replies)

Rating (1)

Thanks 4

3 Entries

3/21/2014 1:15 PM	Rate (0)
schnek Bronze Member Joined: 11/13/2007 Last visit: 12/3/2025 Posts: 41 Rating: (0)	Can anyone explain, why the Undo function is not available while I am ONLINE even in the version V13 of TIA Portal? The undo is disabled even if I am editing WinCC project and am online on a PLC... why is that?

Suggestion To thank Quote Answer

3/21/2014 1:32 PM	Rate (0)
0_Einstein Grandmaster-Expert Joined: 7/7/2010 Last visit: 12/23/2025 Posts: 16325 Rating: (2520)	schnek Can anyone explain, why the Undo function is not available while I am ONLINE even in the version V13 of TIA Portal? The undo is disabled even if I am editing WinCC project and am online on a PLC... why is that? Like you I have wondered a lot of these "why" type questions. The best answer I can give is to send it to: Support Request Maybe then they will see they simply overlooked a setting in the code.
	science guy
Suggestion To thank Quote Answer

3/22/2014 12:09 PM	Rate (1)
Mr Lindh Bronze Member Joined: 2/12/2011 Last visit: 6/3/2025 Posts: 115 Rating: (34)	FYI: - We reported problemnot possible to make undo while onlineto Siemens Development, 2013-09. The answer from development was: With the new recovery strategy that will be available in the future this issue will be solved. This is a known behaviour and a solution is being worked at for future versions of TIA Portal >V13. A new recovery strategy is being developed/integrated which will solve this situation. //Mattias
	Mr Lindh,
Suggestion To thank Quote Answer
This contribution was helpful to 4 thankful Users schnek Jorsal 0_Einstein Jens_app

|

Share this page:

Share this page on...

Follow us on