Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Simulation HMI displays # # # #

Created by: Emanuele78 at: 3/19/2014 7:02 PM (13 Replies)

Rating (0)

Thanks 2

Result pages:: |; 1 | 2; |

14 Entries

Entries per page: 10 | all

3/20/2014 4:39 PM	Rate (0)
Emanuele78 Posts: 40 Rating: (0)	Someone can help me? I grope in the dark...
Emanuele78 Posts: 40 Rating: (0)
Suggestion To thank Quote Answer

3/21/2014 8:19 AM	Rate (0)
K!ke Posts: 1299 Rating: (136)	Hello, what datatypes are the tags? check the display format of the io fields. K!ke
K!ke Posts: 1299 Rating: (136)
Suggestion To thank Quote Answer

3/21/2014 8:38 AM	Rate (0)
Emanuele78 Posts: 40 Rating: (0)	K!ke Hello, what datatypes are the tags? check the display format of the io fields. K!ke Thedatatypes tags are: - Uint in DB, in display the format is DECIMAL 999999 - Real (%MD20), in display the format is DECIMAL 9999
Emanuele78 Posts: 40 Rating: (0)
Suggestion To thank Quote Answer

3/26/2014 8:18 AM	Rate (0)
K!ke Posts: 1299 Rating: (136)	Hello, are you sure thevalue "000" is wrong? usually the "###" is displayed if there is any problem with communication. "000" doesn't imply any problems... are the io fields configured for output or output and input? try to change the values and check if theywill betransfered to plc. K!ke
K!ke Posts: 1299 Rating: (136)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Communication

Follow us on