Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

TIA portal V11 to TIA portal V12

Created by: Stud-auto at: 4/1/2014 2:11 PM (2 Replies)

Rating (0)

Thanks 1

3 Entries

4/1/2014 2:11 PM	Rate (0)
Stud-auto Posts: 2 Rating: (0)	Hello, I'm a student in France and I would like transfer one program ( for a RFID system) from TIA portal V11 to V12. Is it possible ? If yes, how to do that ? I have already try to copy/paste but TIA portal V12 don't want copy/paste. Thanks for your help have good day
Stud-auto Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

4/1/2014 2:24 PM	Rate (0)
TomDeWou Platinum Member Joined: 11/15/2006 Last visit: 3/26/2025 Posts: 1319 Rating: (176)	Open the V11 project in V12 and select upgrade from the menu.
	Have Fun! TomDeWou
Suggestion To thank Quote Answer

4/1/2014 2:43 PM	Rate (0)
Stud-auto Posts: 2 Rating: (0)	It was not very difficult finally . thank you for your help TomDeWou, have fun too !
Stud-auto Posts: 2 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users TomDeWou

|

Share this page:

Share this page on...

Follow us on