Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Programmming using S7 statement list

Created by: AutoGen_529858 at: 4/14/2014 8:52 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

4/14/2014 8:52 AM	Rate (0)
AutoGen_529858 Posts: 3 Rating: (0)	Dear all, I am task to write a simpleprogram for a elevator movement, and it my first time to using S7. This prgram must be written using using STL statement lists. It a 3 level elevator, each level got a indicator lamp in the cabin. there is a call button on every floor. a indicator on each floor with a sensorfor each floor to detect the life on which level. I did the IO table but not sure how to get the program started. See attached. Could anyone advise on this? Regards, Orange Attachment elevator sym list.JPG (393 Downloads)
AutoGen_529858 Posts: 3 Rating: (0)
Suggestion To thank

4/14/2014 9:09 AM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 1/9/2026 Posts: 4114 Rating: (195)	closed cause question published twice. The second thread with the subject Programming using STL S7 for elevator is published within the conference STEP 7 / STEP 7 Lite. Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on