Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

supporting software required

Created by: Jebil at: 4/17/2014 4:44 PM (6 Replies)

Rating (1)

Thanks 1

7 Entries

4/17/2014 4:44 PM	Rate (0)
Jebil Posts: 24 Rating: (0)	Dear Sir, i have TIA portal V11 used for S7-1200 and basic panel programming. Now i am in a new project where we are using CPU 314(S7-300),TP177B,TD200,S7-200(CPU226 CN).Could you please suggest me what all are the programming softwares needed for programming? Is there any update software which can be used on TIA portal so that S7-200,S7-300 programming can also be done? Kindly advice please
Jebil Posts: 24 Rating: (0)
Suggestion To thank Quote Answer

4/17/2014 4:57 PM	Rate (0)
Marcjan Diamond Member Joined: 4/22/2010 Last visit: 3/31/2025 Posts: 5697 Rating: (716)	Hello, Tp177B : Wincc Flexible 2005 or higher TD200 and CPU 200 : Step 7 Microwin S7 300: if older type Step7 5.X if newer type Tia portal V11 or higher. Put your partnumber in the searchfield to discover more details. Regards, Marcjan
	Last edited by: Marcjan at: 4/17/2014 5:12 PM Last edited by: Marcjan at: 4/17/2014 5:01 PM Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

4/17/2014 6:46 PM	Rate (0)
Jebil Posts: 24 Rating: (0)	Many many thanks for your quick reply..i have cpu 314 for s7.can i use TIA portal?but in my Tia PORTAL ONLY 1200 CPU's are displayed
Jebil Posts: 24 Rating: (0)
Suggestion To thank Quote Answer

4/17/2014 7:32 PM	Rate (0)
Marcjan Diamond Member Joined: 4/22/2010 Last visit: 3/31/2025 Posts: 5697 Rating: (716)	Hello, No thanks, that's what we are here for: help each other. Can you give us theversion of your Tia software ( Help installed software) and also the partnumber of your 300 CPU (6ES7 ...... .... regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

4/17/2014 8:46 PM	Rate (0)
Jebil Posts: 24 Rating: (0)	Hi, Here is my update TIA portalVersion V11 SP2 Update 3 cpu- 314-1ag13-0ab0 Also my TIA portal has wincc basicVersion V11 SP2 Update 3 Can i use this to program TP177 discussed before?
Jebil Posts: 24 Rating: (0)
Suggestion To thank Quote Answer

4/18/2014 9:50 AM	Rate (1)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 12/24/2025 Posts: 9097 Rating: (1202)	Hello Jebil, I guess you are using Step 7 (TIA Portal) Basic (only for S7-1200) And WinCC (TIA Portal) Basic (only for Basic panels) You will need: Step 7 (Tia Portal) Professional or Step 7 v5.5 and WinCC (TIA portal) Comfort or WinCC flexible 2008 Best regards, Wizard

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Ste39

4/18/2014 3:00 PM	Rate (0)
Ste39 Posts: 4620 Rating: (710)	Hello Wizard, Go towards the 600 STAR!!!!!!
Ste39 Posts: 4620 Rating: (710)	Last edited by: Ste39 at: 4/18/2014 3:01 PM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on