Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

convert S5_135 to S7

Created by: tyvan at: 9/5/2007 8:57 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

9/5/2007 8:57 AM	Rate (0)
tyvan Posts: 12 Rating: (0)	Hi dears! Ihave the S5_135 system in my factory, it include deives as: In main cabinet: - CPU928B (6ES5-928-3UB21); CP(6AV1 242 -0AB10); input/output modules (6ES5430-4UA14; 6ES5451-4UA14; 6ES5451-4UA14; 6ES5451-4UA13; 6ES5470-4UB13); ET200 interface module (6ES5 308-3UC11). Monitor panel MP40 C36-A (6AV5 040-1BF12-0BA0) is connecting to CP. In small cabinets: - ET200 (6ES5 318 8MB12); some digital inputs/ouputs; stepper motor control module IP267. Now we have difficult about spare parts for this system, so we have intend to change this system to S7 system. Could you please show us some general manners to perform our intention? Iknow only the basic of Simatic step 5 and step 7. If your help related to some reference documetation, please show me address to download them. My english is not very well, I apologize to you for my spelling mistake. thanks you for your help!
tyvan Posts: 12 Rating: (0)
Suggestion To thank Quote Answer

9/7/2007 9:30 AM	Rate (0)
minhtq Posts: 8 Rating: (0)	Hello tyvan, Are you come from VN? If right pls contact me via thaiquangminh@gmail.com. I can help you some thing. Regards!
minhtq Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

9/8/2007 5:40 AM	Rate (0)
tyvan Posts: 12 Rating: (0)	Thank you for your suggestion to help me solving this. I think you are also Vietnamese, same me! I'm going to email to you soon. My e-mail: vodinh_van1975@yahoo.com Have a good day! tyvan
tyvan Posts: 12 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on