Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

How to make "Analogue ramp function" open a ball valve with positioner?

Created by: Jambo at: 4/24/2014 6:27 PM (2 Replies)

Rating (0)

Thanks 1

3 Entries

4/24/2014 6:27 PM	Rate (0)
Jambo Posts: 13 Rating: (0)	Dear All, I have ball valve with a 4/20mA positioner and I would like to open this at a set speed (no other inputs are required so I don't require PI controller) I think I need an analogue ramp but can't seem to make it move even in simulation. Can someone show me an example of how the function block is connected? Many Thanks Chris
Jambo Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

4/24/2014 8:03 PM	Rate (0)
Marcjan Diamond Member Joined: 4/22/2010 Last visit: 3/31/2025 Posts: 5697 Rating: (716)	Hello, I guess you forgot to put a number in Level 1. Regards, Marcjan Attachment analog_ramp.jpg (348 Downloads)
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

4/25/2014 10:44 AM	Rate (0)
Jambo Posts: 13 Rating: (0)	Thanks for your help. Probably should of figured that out. Chris
Jambo Posts: 13 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Marcjan

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on