Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

6ES7 223-1PH32-0XB0 Module configuration

Created by: ABDChip at: 5/13/2014 9:28 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

5/13/2014 9:28 PM	Rate (0)
ABDChip Posts: 1 Rating: (0)	Hi all, I am getting to grips with TIA portal V12 so the answer to my question may be pretty basic. I have a S7-1200 and I have added a6ES7 223-1PH32-0XB0 di/do expansion module. The diagnostics LED on the SM flashes green saying that it is not configured (according to the manual) and the CPU is demanding maintenance. no matter what i try i cannot seem to get this module to configure. I have tried selecting it in the hardware catalog and drag and dropping it, I have tried auto detect I have tried comparing online / offline etc. Please can somone tell me what I am doing wrong as up to now it was all going so well !
ABDChip Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

5/14/2014 8:31 AM	Rate (0)
peterplavec Posts: 28 Rating: (1)	Did you tried to download configuration to PLC? You can do it so: Click on PLC in tree view of TIA portal, right click > Download to CPU. After download is done, blinking LEDS should go solid green.
peterplavec Posts: 28 Rating: (1)
Suggestion To thank Quote Answer

5/14/2014 8:54 AM	Rate (0)
umencho Grandmaster Joined: 3/21/2006 Last visit: 10/16/2025 Posts: 10239 Rating: (1183)	Contact withSupport Requestwith that issue. Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on