Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Firmware missmatch

Created by: JoKuhl at: 5/15/2014 12:08 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

5/15/2014 12:08 PM	Rate (0)
JoKuhl Posts: 43 Rating: (0)	Hi, I got an CPU 1511-1PN with firmware V1.0.1 but configured a project with CPU 1511-1PN V1.5. As I remember from simatic manager Step7 v4.5 etc. it was always possible to send over the program or parts of the program to the controller even if there is a firmware missmatch. Is this still possible in V13 UPD1? Because right now I can't and don't know if I just missed some options to set/unset.
JoKuhl Posts: 43 Rating: (0)
Suggestion To thank Quote Answer

5/15/2014 12:44 PM	Rate (0)
TomDeWou Platinum Member Joined: 11/15/2006 Last visit: 3/26/2025 Posts: 1319 Rating: (176)	The other way rund should work. So configuring a 1.0 PLC and using a 1.5 should work, but not with 1.5 configured and 1.0 running. The firmware can be found here:http://support.automation.siemens.com/WW/view/en/67295862/130000
	Have Fun! TomDeWou
Suggestion To thank Quote Answer

5/15/2014 1:01 PM	Rate (0)
Madhava Silver Member Joined: 11/26/2011 Last visit: 4/11/2025 Posts: 508 Rating: (23)	Its not possible to make changes on firmware 1.0 with this.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on