Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Loading webpage to PLC

Created by: Rahma at: 5/14/2014 2:29 PM (6 Replies)

Rating (1)

Thanks 1

7 Entries

5/14/2014 2:29 PM	Rate (0)
Rahma Posts: 14 Rating: (0)	Dear All, Greetings! I am using s1200 DC/DC/RLY. While trying to load a user defined webpage program the I am encountering an issue. I followed all the steps to enable the webpage but while downloading the device the program to the CPU it gives a message that the "Configured CPU and the target CPU are not identical". Thus the operation is aborted and my program is not being downloaded to the CPU. I have checked all the profinet settings and IP address but still it won't work. Kindly help me ASAP as its an urgent calll. Thank you in advance
Rahma Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

5/14/2014 3:17 PM	Rate (1)
TomDeWou Platinum Member Joined: 11/15/2006 Last visit: 3/26/2025 Posts: 1319 Rating: (176)	Do the FW and MLFB fit? The download dialog should at least show a warning before. Otherwise, what is the state of the PLC? Is a SMC plugged in?
	Have Fun! TomDeWou
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users 0_Einstein

5/15/2014 7:55 AM	Rate (0)
Rahma Posts: 14 Rating: (0)	TomDeWou Do the FW and MLFB fit? The download dialog should at least show a warning before. Otherwise, what is the state of the PLC? Is a SMC plugged in? Hi Sir, The download dialog box also shows the warning that the Configured and the Target device are not identical The PLC is working normally only the webpage program is not getting loaded on it. How to solve this problem? Thank you
Rahma Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

5/15/2014 8:36 AM	Rate (0)
TomDeWou Platinum Member Joined: 11/15/2006 Last visit: 3/26/2025 Posts: 1319 Rating: (176)	Did you do a STOP/RUN or PowerCycle of the PLC? Maybe this might already solve it.
	Have Fun! TomDeWou
Suggestion To thank Quote Answer

5/15/2014 9:12 AM	Rate (0)
Rahma Posts: 14 Rating: (0)	Yes I did, but still the problem is not solved You may check the attached error image, so that u can understand the issue more clearly. Attachment Error2.jpg (194 Downloads)
Rahma Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

5/15/2014 12:29 PM	Rate (0)
TomDeWou Platinum Member Joined: 11/15/2006 Last visit: 3/26/2025 Posts: 1319 Rating: (176)	Why do you have a 211-1HE31 V3.0 PLC while you have a PLC 211-1HD30 V2.2 projected? Those differences may be the source for your issue. Why don't you change your plc to the used one? Which TIA Portal Version do you have?
	Have Fun! TomDeWou
Suggestion To thank Quote Answer

5/15/2014 1:26 PM	Rate (0)
Rahma Posts: 14 Rating: (0)	TomDeWou Why do you have a 211-1HE31 V3.0 PLC while you have a PLC 211-1HD30 V2.2 projected? Those differences may be the source for your issue. Why don't you change your plc to the used one? Which TIA Portal Version do you have? Because before also I used 211-1HE31 with 211-1HD30 and TIA portal only have 211-1HE31 for 1211c DC/DC/RLY. I also checked the specifications of both which are similar to each other. I use V11 of TIA portal
Rahma Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on