Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

TIA Portal

Created by: VVago at: 5/18/2014 8:11 PM (12 Replies)

Rating (0)

Thanks 3

Result pages:: |; 1 | 2; |

13 Entries

Entries per page: 10 | all

5/18/2014 9:59 PM	Rate (0)
VVago Posts: 784 Rating: (53)	Hello, Is it possible to upload a program from CPU programmed by TIAV11 using TIA Portal V13? Best regards....
VVago Posts: 784 Rating: (53)
Suggestion To thank Quote Answer

5/18/2014 10:13 PM	Rate (0)
Amit_86 Posts: 1750 Rating: (272)	Wago Hello, Is it possible to upload a program from CPU programmed by TIAV11 using TIA Portal V13? Best regards.... HI Wago, it should be possible techincally. I have never worked with TIA portal 13. But as per Standard Practice, you should be able to Upload program with TIA Portal 13.
Amit_86 Posts: 1750 Rating: (272)
Suggestion To thank Quote Answer

5/18/2014 10:17 PM	Rate (0)
Ganes10 Platinum Member Joined: 8/31/2010 Last visit: 12/6/2025 Posts: 1525 Rating: (231)	Wago Hello, Is it possible to upload a program from CPU programmed by TIAV11 using TIA Portal V13? Best regards.... Hello Wago, You cannot upload the blocks from a CPU which was downloaded using v11. It can be opened with either v11 or v12 (in compatibility mode)
	Like it? Rate it!
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users VVago

|

Share this page:

Share this page on...

Follow us on