Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

can't use identical S7_connection name for different PC stations.

Created by: ronny.dp at: 5/20/2014 6:15 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

5/20/2014 6:15 PM	Rate (0)
ronny.dp Posts: 28 Rating: (0)	Hi , For a project that has one PLC and two PC stations I need two S7_connection's to the PLC , one for each PC station. Now I would like the name for the S7_connection to be the same on the side of the PC stations. But this does not seem to be possible in TIA, when it always worked fine with Step7/netpro. I need these names identical , because it allows me to use the same connection name to compose OPC_id strings on both PC stations. ( for instance S7:[PLC1]DB1,W0) . Is there another way to accomplishwhat I need , or did I overlook something ? Ronny. Attachment TIA_S7_connections.jpg (374 Downloads)
ronny.dp Posts: 28 Rating: (0)
Suggestion To thank Quote Answer

5/20/2014 6:17 PM	Rate (0)
ronny.dp Posts: 28 Rating: (0)	This attachment shows it does work in Step7/netpro. Attachment netpro_S7_connections.jpg (363 Downloads)
ronny.dp Posts: 28 Rating: (0)	Last edited by: ronny.dp at: 5/20/2014 6:18 PM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on