Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

want to make triangle button in wincc

Created by: ect_09 at: 6/3/2014 8:15 PM (6 Replies)

Rating (1)

Thanks 3

7 Entries

6/3/2014 8:15 PM	Rate (0)
ect_09 Experienced Member Joined: 1/24/2014 Last visit: 6/11/2025 Posts: 119 Rating: (1)	HELLO, i need information that i want to add triangle button in WINCC, but i didnt find. kindly tell me.. i am confused about that. am not professional. its a beginner level for me.. Thanks, Regards, Mehtab Ahmed

Suggestion To thank Quote Answer

6/3/2014 8:56 PM	Rate (0)
rdoliveira Gold Expert Joined: 4/26/2012 Last visit: 9/1/2025 Posts: 1644 Rating: (190)	I tried once but it did not work winccflexible 2008. they have a suggestion. trylink
	"Always make a backup before performing any tests and check the best time to do so. Obrigado.
Suggestion To thank Quote Answer

6/3/2014 9:21 PM	Rate (0)
William_B Posts: 5225 Rating: (1204)	--deleted--
William_B Posts: 5225 Rating: (1204)	Last edited by: William B. at: 6/3/2014 10:03 PM double posting.. do not know why
Suggestion To thank Quote Answer

6/3/2014 9:22 PM	Rate (0)
William_B Posts: 5225 Rating: (1204)	mehtabahmed HELLO, i need information that i want to add triangle button in WINCC, but i didnt find. kindly tell me.. i am confused about that. am not professional. its a beginner level for me.. Thanks, Regards, Mehtab Ahmed Hi. No need to apologise. Changes in technology regularly cycle us between expert and beginner. I do not know what knowledge you do have. It will also help if you remind me what WinCC version you have. Maybe also include what panel you wish to create this for. So I will fill in with general terms and you ask detail questions.. okay? There are some library files that already contain some samples. I will assume you need to know how to do it yourself. I suggest you go ahead and draw a triangle inside a rectangle block. I suggest software like Paint.Net. The colour of the rectangle block is the same colour as the background you use for your WinCC. In other words.. we are faking the look of the triangle. You need to draw x2 versions. One version for button "not pressed" and the other for button "pressed". Save these as BMP bitmaps for best results. Next you will create a button. I will assume you know how to do that - if not ask. For the button under PROPERTIES > GENERAL > MODE, you have the options text / graphic / ... . Select graphic and next to that selection choose your created pictures. (see JPG as guide for last step) You might also want to switch off the 3D look of the button. Just go through all the properties settings.. it is there. Come back to us and ask if something is unclear. Greetings. w Attachment Visual clue_Button with pictures on it.jpg (568 Downloads)
William_B Posts: 5225 Rating: (1204)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users ect_09

6/3/2014 10:02 PM	Rate (1)
rdoliveira Gold Expert Joined: 4/26/2012 Last visit: 9/1/2025 Posts: 1644 Rating: (190)	mehtabahmed HELLO, i need information that i want to add triangle button in WINCC, but i didnt find. kindly tell me.. i am confused about that. am not professional. its a beginner level for me.. Thanks, Regards, Mehtab Ahmed I tested now with a "Symbol library" is not a button but has events too. good luck Attachment btn.jpg (600 Downloads)
	"Always make a backup before performing any tests and check the best time to do so. Obrigado.
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users William_B Yahu

6/3/2014 10:07 PM	Rate (0)
William_B Posts: 5225 Rating: (1204)	rdoliveira tested now with a "Symbol library" is not a button but has events too. good luck Thanks for the detailed post. One thing though.. which version of TIA are you running? Perhaps licensed for WInCC Runtime? My solution was for a panel.. does that matter? w
William_B Posts: 5225 Rating: (1204)	Last edited by: William B. at: 6/3/2014 10:09 PM
Suggestion To thank Quote Answer

6/3/2014 10:26 PM	Rate (0)
rdoliveira Gold Expert Joined: 4/26/2012 Last visit: 9/1/2025 Posts: 1644 Rating: (190)	I'm using V12. just an example. I believe that both work
	"Always make a backup before performing any tests and check the best time to do so. Obrigado.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Adv Picture Controls

Follow us on