Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

TIA portal

Created by: Vít Souček at: 6/17/2014 4:45 PM (3 Replies)

Rating (1)

Thanks 1

4 Entries

6/17/2014 4:45 PM	Rate (0)
Vít Souček Posts: 5 Rating: (1)	Hi, is possibility to program S7-400H system with TIA Portal? When inserting new device, thre is no H CPU listed in catalog. If there is not (and possibly won't be in some time) is there any other redundant CPU on S7-1500 basis? Thanks Vít Souček
Vít Souček Posts: 5 Rating: (1)
Suggestion To thank Quote Answer

6/19/2014 9:51 AM	Rate (1)
IBN-Service Posts: 8946 Rating: (1000)	TIA Portal do not Support H-CPU yet.
IBN-Service Posts: 8946 Rating: (1000)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users William_B

6/19/2014 10:03 AM	Rate (0)
Vít Souček Posts: 5 Rating: (1)	Thanks for reply. Than it means we need to discus with our customer, that it is not possible. Is there allready S7-400H Sheduled in some TIA Portal version? Or is it lets say "some time will be supported" Thanks Vít Souček
Vít Souček Posts: 5 Rating: (1)
Suggestion To thank Quote Answer

6/19/2014 10:19 PM	Rate (0)
IBN-Service Posts: 8946 Rating: (1000)	Vít Souček ..Or is it lets say "some time will be supported" ... [/Quote] Yes, but I cant tell you, when.
IBN-Service Posts: 8946 Rating: (1000)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on