Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Sequential for Roller

Created by: Edy Missrie at: 6/25/2014 4:29 PM (2 Replies)

Rating (0)

Thanks 2

3 Entries

6/25/2014 4:29 PM	Rate (0)
Edy Missrie Posts: 1 Rating: (0)	Hello. I need a LOGO! program that is similar to the Gate Example in LOGO's tutorial. I have a motorized roller that needs to be controlled from a single input or switch. The sequence is as follows: First press: roller down (Q1 on) Second press: roller stops (Q1 and Q2 off) Third press: roller up (Q2 on) Fourth press: (Q1 and Q2 off) I am using an edge triggered block to prevent both Q1 and Q2 from turning on simultaneously, but they require TWO inputs (I1 and I2). I would like to have a single input do the sequence. With best regards, Edy Attachment LOGO Forum - Program.jpg (312 Downloads)
Edy Missrie Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

6/25/2014 6:59 PM	Rate (0)
cdrshort Posts: 134 Rating: (16)	not sure if it fit your needs but i think it will help you to your problem! Attachment drum 1in 2out.zip (308 Downloads)
cdrshort Posts: 134 Rating: (16)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users William_B

6/25/2014 10:40 PM	Rate (0)
William_B Posts: 5225 Rating: (1204)	Edy Missrie First press: roller down (Q1 on) Second press: roller stops (Q1 and Q2 off) Third press: roller up (Q2 on) Fourth press: (Q1 and Q2 off) What a nice puzzle! @cdrshort: Thank you for sharing your idea. I do not think it solves the riddle 100%, but I have built onto your idea for the code added here. You deserve the credit for this one! @Edy Missrie: Welcome to our community. Please find attached adesign idea.. see if this will work for you. I hope to see you again. Greetings. w Attachment Design Idea_One trigger to two outputs.zip (317 Downloads)
William_B Posts: 5225 Rating: (1204)	Last edited by: William B. at: 6/25/2014 10:41 PM formatting of quote
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users cdrshort

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on