Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Simoodrive 611 booting problems

Created by: Dreaku at: 7/4/2014 6:59 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

7/4/2014 6:59 PM	Rate (0)
Dreaku Posts: 12 Rating: (0)	Hi guys, I having problems booting PLC on a Siemens 840D control. The problem I have is with the LED's and 7 element display of the drive. When I try to scrub it, the LED are not reacting and also the 7 element dispaly is not reacting. The LEDs are blocked like in the pictures I've attached. PS. I had a loading sistem conected to the PROFIBUS cabel on the unit, and I removed it without proper "uninstal" just puled the plugs out and good by. I think this is creating the comunication problem. How can I remove the the loading unit from thr software? I have a trumatic L3030 '99 laser Attachment zoom plc nck.jpg (359 Downloads)
Dreaku Posts: 12 Rating: (0)	Last edited by: Dreaku at: 7/4/2014 10:33 PM Last edited by: Dreaku at: 7/4/2014 10:28 PM
Suggestion To thank

7/5/2014 10:28 PM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 8/22/2025 Posts: 4114 Rating: (195)	closed cause question posted twice. The second thread with the subject NC booting problemsis published within the conference SINUMERIK CNC automation systems. Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on