Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

v12 project save as v11

Created by: pratik7332 at: 8/1/2014 7:44 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

8/1/2014 7:44 AM	Rate (0)
pratik7332 Bronze Member Joined: 11/26/2009 Last visit: 12/25/2025 Posts: 223 Rating: (1)	hi, I want to save V12 project as V11 in TIA is it possible??? Thnx in advance

Suggestion To thank Quote Answer

8/1/2014 7:47 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 12/19/2025 Posts: 22816 Rating: (3073)	Hello, no this is not possible. Regards Christoph

Suggestion To thank Quote Answer

8/1/2014 1:38 PM	Rate (0)
0_Einstein Grandmaster-Expert Joined: 7/7/2010 Last visit: 12/29/2025 Posts: 16332 Rating: (2520)	pratik7332 hi, I want to save V12 project as V11 in TIA is it possible??? Thnx in advance If you open a default V11 project, you can copy your V12 project components (DBs/OBs/FBs/FCs, tag table, custom datatypes, hardware) and then save it as a V11 project. There is no "Save As" V11 option though. It is 100% manual, but better than clicking/typing it all over again.
	science guy
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on