Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

fault message ''700055-I/R module or monitoring module not ready for operation"

Created by: anil J at: 7/31/2014 7:12 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

7/31/2014 7:12 PM	Rate (0)
anil J Posts: 2 Rating: (0)	Hi I have a fault message ''700055-I/R module or monitoring module not ready for operation'' for Simodrive 611 system. and power module used is LT module INT300A order code is 6SN1123-1AA0-0KA1 and it has Red led on it. checked for 24 v dc power supply to this LT module and is ok. please help what could be cause for this fault. and is it problem with Power module used for spindle and main I/R module itself? your suggestions will be much helpful . thanks.
anil J Posts: 2 Rating: (0)	Last edited by: CS Moderator at: 8/1/2014 6:54 AM new subject after splitting from /tf/WW/en/Posts/44384#top
Suggestion To thank Quote Answer

8/8/2014 6:09 AM	Rate (0)
PISCEAN 2010 Posts: 8092 Rating: (884)	Hello, Could you please attach the photograph of infeed & power module which could help to analyse the problem better?
PISCEAN 2010 Posts: 8092 Rating: (884)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on