Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

SIMODRIVE 611 Analog setup with Parameter Board lacking documentation

Created by: HandyAndy at: 8/8/2014 8:41 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

8/8/2014 8:41 PM	Rate (0)
HandyAndy Posts: 46 Rating: (0)	Hey guys, We have many customers using the old 611A drive with the "User Friendly" interface. The setup for this drive is a Parameter Board with DIP switches and resistors. The setup procedure developed years ago involves replacing resistor R9 with 150k and cutting out R32 & R54 completely. I can't find any documentation regarding the purpose behind this. Does anybody out there know what these resistors are for? Thanks in advance, Andy
HandyAndy Posts: 46 Rating: (0)	Last edited by: HandyAndy at: 8/8/2014 9:56 PM
Suggestion To thank Quote Answer

8/12/2014 6:46 AM	Rate (0)
PISCEAN 2010 Posts: 8092 Rating: (884)	Please see the attached file. HTH. Attachment C:\Documents and Settings\ntguest\Desktop\611A resistors identification.pdf (467 Downloads)
PISCEAN 2010 Posts: 8092 Rating: (884)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on