Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

X axis drive versions

Created by: cncsparky at: 8/13/2014 2:59 PM (2 Replies)

Rating (0)

Thanks 1

3 Entries

8/13/2014 2:59 PM	Rate (0)
cncsparky Posts: 32 Rating: (2)	Hello! We lost one of four X axis drives on our machine. XS1 is smoking , The others are XM1, XM2, XS2. # 6SN1123-1AA00-0DA1 Version E We don't stock the exact replacement. What we have stocked: 6SN1123-1AA00-0DA2 version A -0DA0version E -0DA0 version A Which would be best to install,if any? How important is that all X axis drives are exact same? Thanks!
cncsparky Posts: 32 Rating: (2)
Suggestion To thank Quote Answer

8/13/2014 7:32 PM	Rate (0)
Deleted User Posts: 767 Rating: (69)	Hello cncsparky, The part numbers you have mentioned in your document are all for the power module. In general, these part numbers can be mixed for the hardware versions. The slide in control units (and possibly option modules as well)which insert into the power section are the critical items that must maintain the same or have a compatibility with the rest of system. Best Regards, Deputy
Deleted User Posts: 767 Rating: (69)
Suggestion To thank Quote Answer

8/13/2014 10:50 PM	Rate (0)
cncsparky Posts: 32 Rating: (2)	Thanks. We installed the -0DA2 version A power module and it worked.
cncsparky Posts: 32 Rating: (2)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Deleted User

|

Share this page:

Share this page on...

Follow us on