Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

cannot establish connection to the automation license manager service

Created by: Andritz_TGI at: 8/22/2014 11:16 AM (12 Replies)

Rating (0)

Thanks 0

Result pages:: |; 1 | 2; |

13 Entries

Entries per page: 10 | all

8/22/2014 3:39 PM	Rate (0)
Andritz_TGI Posts: 13 Rating: (0)	Ok I uninstall automation licence manager, and install the one from starter setup, same problem. I do not understand! Thomas
Andritz_TGI Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

8/22/2014 4:12 PM	Rate (0)
ChristophD Grandmaster Joined: 5/12/2006 Last visit: 1/15/2026 Posts: 22800 Rating: (3073)	Hi, the STARTER Licence Manager is older V5.2 then the onbe wich comes with the TIA so you should not install the older one. You can deactive the Siemens Program from startup one bye on an show which application cause this message. Regards Christoph

Suggestion To thank Quote Answer

8/22/2014 5:12 PM	Rate (0)
Andritz_TGI Posts: 13 Rating: (0)	Hi, I unselected Wincc flexible 2008 in Msconfig, and it seems that error message does not appear. It's good. Does somebody knows why do we need to start flexible at startup? Thanks Thomas
Andritz_TGI Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on