Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Error closing step7

Created by: zzFrank at: 11/22/2005 2:44 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

11/22/2005 2:44 PM	Rate (0)
zzFrank Posts: 8 Rating: (0)	When I close step 7 or Hw conf. raise the error: S7HWCNFX.EXE - Application Error : The instruction at "0x73e2d3df" referenced memory at "0x00000014". The memory could not be "read". I have a PG with Win XP Sp2 and Step7 5.3 sp 3.
zzFrank Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

1/3/2006 2:44 PM	Rate (0)
Cicero Platinum Member Joined: 10/10/2005 Last visit: 1/29/2025 Posts: 1940 Rating: (138)	Hello, regarding to your error message please check whether this behaviour is by all STEP 7 projects or only by one project. In this case we recommend to save your project with "Save As..." together with the option "With Reorganization (slow)". An other reason for this behaviour could be a inserted external slave, which gsd file is not compatible with STEP 7 or the gsd file has an error. Or you have programmed with an optional packagewith an earlierversion, which is not compatible with STEP 7 V5.3 or Windows XP SP2. With best regards Cicero

Suggestion To thank Quote Answer

1/9/2006 11:13 AM	Rate (0)
zzFrank Posts: 8 Rating: (0)	Thank you Cicero for your help. The problem is still present. Itried to make a new empty project with the same results. bye Frank.
zzFrank Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on