Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

"Unknown" in communication refresh list

Created by: aeng at: 11/5/2007 1:55 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

11/5/2007 1:55 AM	Rate (0)
aeng Posts: 9 Rating: (0)	Hello, Can anybody tell me the meaning of "unknown" (as opposed to "not present")when searching for cpu's through ethernet? (Please see attachment). Does it mean that there was a response from that address but it's not recognised? Could this mean that there is an incorrect setting for that unit? Any ideas what that incorrect setting might be? Thanks J Attachment Comms.JPG (396 Downloads)
aeng Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

11/7/2007 9:00 PM	Rate (0)
aeng Posts: 9 Rating: (0)	I have discovered the possible problem. When I tried to edit the ethernet wizard config data it comes up with "error reading existing wizard configuration..." so have re-configured wizard and will get somebody (in other country) to re-download repaired program, and hopefully problem solved!
aeng Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

11/8/2007 1:36 PM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 10/31/2025 Posts: 4114 Rating: (195)	Hello aeng, thank you for publishing your solution So I hope this thread could help others to solve there problems. Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on