communication logo and 1200 plc

Murali Rajendran

hi,

Thanks for your valuable replay

I have enable protection. But I fount connection errorhere I have attached screen short kindly check and suggest me.

Hi Murali,

I can't know how you have configured the connection in de Logo! end, but usually S7-1200 act as a server and Logo! as a client, so you must disable option in "Active connection stablishment" (connection properties) at the S7-1200 side.

I attachsome screen captures with a very simple sample (anly 2 bits one in each direction) connection between S7-1500 and Logo! 8.

I hope it will help you.

Murali Rajendran

hi,

can you please attach your programe it will help full.

thanks

Hi,

Of course, here you are!

But remember this program is for Logo! 8 and S7-1500 so take it with a grain of salt!

Good luck and have a nice day!

Miguel

magustin

Murali Rajendran

hi,

can you please attach your programe it will help full.

thanks

Hi,

Of course, here you are!

But remember this program is for Logo! 8 and S7-1500 so take it with a grain of salt!

Good luck and have a nice day!

Miguel

Murali Rajendran

hi,

Its working fine.. thanks for your kind support

Hi Murali,

Can you inform us what the problem was?

It could be useful to know it in order to avoid future problems.

Thanks.