Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Need to store a value coming from CM 1241 in PLC permanently

Created by: pavans at: 1/11/2015 10:11 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

1/11/2015 10:11 PM	Rate (0)
pavans Posts: 81 Rating: (0)	Hello Everyone, I need to store a value that comes from CM 1241 module for permanently on a tag. I have created a datablock and a tag in it. But when I turn off the PLC, the tag is going to 0.Please let me know if there is any way to do this?? Thanks pavan
pavans Posts: 81 Rating: (0)
Suggestion To thank Quote Answer

1/12/2015 5:39 AM	Rate (0)
Rajesh_s Experienced Member Joined: 10/20/2011 Last visit: 12/12/2024 Posts: 102 Rating: (3)	Dear sir, Please enable Retain button in that Data block tag it will store the last value.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on