Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

connect to Simodrive611 Analog (6SN1121-0BA11-0AA1) to initialize drive after installing new module.

Created by: StevieB at: 1/6/2013 5:30 PM (3 Replies)

Rating (1)

Thanks 3

4 Entries

1/6/2013 5:30 PM	Rate (0)
StevieB Posts: 1 Rating: (0)	Can't seem to connect to Simodrive611 Analog (6SN1121-0BA11-0AA1) to initialize drive after installing new module. The original had to be replaced as the drive no longer worked and no readout on the display. I'm using the IBS software with the proper cable for communication and I keep getting a "Connection to the converter is faulted" error. I have rung out the cable to verify connections in plug, verified P-051,097 and 052 re-initialize parameters according to manual but keep getting same error code in the IBS software. I have also tried different comm port settings on the laptop with no success. I know the firmware version is 3.00 according to P-099. Any help would be greatly appreiated in this matter.
StevieB Posts: 1 Rating: (0)	Last edited by: CS Moderator at: 1/6/2013 10:39 PM new subject after splitting from /tf/WW/en/Posts/55262#top
Suggestion To thank Quote Answer

1/7/2013 7:58 AM	Rate (0)
PISCEAN 2010 Diamond Expert Joined: 4/23/2010 Last visit: 11/23/2024 Posts: 8092 Rating: (882)	Hello, Can you elaboratethe communicationyou established indetails? e.g. to which port of controller, cable type, laptop or PG, etc etc.

Suggestion To thank Quote Answer

12/18/2014 2:05 AM	Rate (1)
Duncant336 Posts: 3 Rating: (1)	I had the same problem try using cable pinouts 2 - 2 3 - 3 5 - 5 7 - 8 8 - 7 I am using IBS 3.3 with a netbook running windows XP pro and using usb to serial converter cable with the 9 pin to 9 pin. Using the above cable pin out. Setting on com 1 default baud settings. Hope this will help I spent to much time and frustration trying to connect.
Duncant336 Posts: 3 Rating: (1)
Suggestion To thank Quote Answer
This contribution was helpful to 3 thankful Users Forgvn77 Roberson de Souza dergs

4/15/2015 10:05 PM	Rate (0)
Forgvn77 Posts: 10 Rating: (0)	Thank you! This pinout worked great and I was able to download and transfer parameters between cards.
Forgvn77 Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on