HSP for CM1241 in TIA V11

Hi all.

I have TIA V11 SP2 Upd5 professional.

But there is no communication module with number 241-1AH32-0XB0 in catalog.

I only have with number 241-1AH30-0XB0.

Also I can't find HSP for this module.

Is that mean that I need V12 or higher???

Milosh

Hi all.

I have TIA V11 SP2 Upd5 professional.

But there is no communication module with number 241-1AH32-0XB0 in catalog.

I only have with number 241-1AH30-0XB0.

Also I can't find HSP for this module.

Is that mean that I need V12 or higher???

 Hi.

Please review [LINK1] where it says..

Spare Parts Compatibility

The innovated signal modules (6ES7 2xx-xxx32-0XB0) replace the previous signal modules (6ES7 2xx-xxx30-0XB0) and are spare-parts-compatible with them. The revised modules can be used without changes in place of the previous signal modules.

For me that means you declare the device
as a 6ES7 2xx-xxx30-0XB0 in the hardware configuration,
but you are actually using a 6ES7 2xx-xxx32-0XB0.

But do know that there are some functions that will not be available..
which in your case is possibly not a problem.
See [LINK2].

For other opinions and insights I suggest to use forum search for phrase:
CM1241 TIA 11

I hope it works out for you.
w

Thank's a lot.

It is very helpful to know.