Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

MAS 5: Set 5 and modem TC35i

Created by: Zef at: 1/18/2008 5:30 PM (7 Replies)

Rating (0)

Thanks 0

8 Entries

1/18/2008 5:30 PM	Rate (0)
Zef Posts: 18 Rating: (0)	Hi sorry, but try again here Why the new set 5 doesn't work with TC35i? thanks a lot
Zef Posts: 18 Rating: (0)	Last edited by: O_Moderator at: 4/14/2010 1:36 PM subject edited
Suggestion To thank Quote Answer

1/21/2008 5:24 PM	Rate (0)
Sudhakar Member Joined: 3/13/2006 Last visit: 7/19/2010 Posts: 12 Rating: (0)	As a product TC35i will work without any problem. But recently if you look at the Set 5, it is updated withTC65. You will find more information about the Set 5 in the following link. https://www.automation.siemens.com/microset/html_76/solutions/mas05.htm Following link is for TC65 https://pia.khe.siemens.com/index_wireless_module_tc65-14259.htm If you have further questions, please revert. regards, Sudhakar

Suggestion To thank Quote Answer

1/24/2008 7:33 PM	Rate (0)
Zef Posts: 18 Rating: (0)	Thanks yes I now, the new set 5 use modem TC65 but I have many modem TC35ì and the new set 5 doesen't work with this modem HoweverI have applicated any suggestion from this forum! the only possibility is use the old version of set 5 thanks a lot foe any suggestion
Zef Posts: 18 Rating: (0)
Suggestion To thank Quote Answer

1/25/2008 4:51 PM	Rate (0)
Lifrasil Bronze Member Joined: 9/29/2005 Last visit: 12/2/2025 Posts: 313 Rating: (24)	Hi Zef, sorry for my late response. Attached you will find a new version of the library + application code. To improve the code please tell me if it works or not. If not please additionaly tell me what version do you use. So please connect your pc/COMx to the GSM-Modem via modem cable and enter the command "ATI". You must not use the old version I agree with you, there a lof of user here in this forum with the old gsm-modem tc35t/i! Lifrasil. Attachment Set5_library_test2_TC35T.zip (323 Downloads)

Suggestion To thank Quote Answer

1/28/2008 2:58 PM	Rate (0)
Import-User-1 Posts: 3609 Rating: (29)	Sudhakar As a product TC35i will work without any problem. But recently if you look at the Set 5, it is updated withTC65. You will find more information about the Set 5 in the following link. https://www.automation.siemens.com/microset/html_76/solutions/mas05.htm Following link is for TC65 https://pia.khe.siemens.com/index_wireless_module_tc65-14259.htm If you have further questions, please revert. regards, Sudhakar Importing question of a user Rubeen I am also having same doubt, please let me know set5 is communicating only TC65 ? it will work with MC35i or any other GSM kit..?
Import-User-1 Posts: 3609 Rating: (29)
Suggestion To thank Quote Answer

1/29/2008 3:16 PM	Rate (0)
Zef Posts: 18 Rating: (0)	Lifrasil Hi Zef, You must not use the old version I agree with you, there a lof of user here in this forum with the old gsm-modem tc35t/i! HiLifrasil I'm go to try your example, thanks a lot Lifrasil!!!
Zef Posts: 18 Rating: (0)
Suggestion To thank Quote Answer

2/22/2008 8:33 PM	Rate (0)
Lifrasil Bronze Member Joined: 9/29/2005 Last visit: 12/2/2025 Posts: 313 Rating: (24)	Hi Zef, the new version (library v2.0) was just uploaded to the S&S Portal. Feel free to download it. Its compatible to TC35i/T now. http://support.automation.siemens.com/WW/view/en/21063345 regards

Suggestion To thank Quote Answer

3/1/2008 9:05 AM	Rate (0)
Zef Posts: 18 Rating: (0)	GREAT!!!! thanks a lot bye
Zef Posts: 18 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on