Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

in TCP, out= "connection parter denies the establishment of connection",i do not find the reason.

Created by: llsl0304 at: 4/17/2008 9:03 AM (5 Replies)

Rating (0)

Thanks 0

6 Entries

4/17/2008 9:03 AM	Rate (0)
llsl0304 Posts: 78 Rating: (0)	hello,everyone in TCP between simotion and PLC, simotion side: _Tcpopenclient, out ="connection parter denies the establishment of connectionn" i do not find the reason. thank you
llsl0304 Posts: 78 Rating: (0)
Suggestion To thank Quote Answer

4/17/2008 9:21 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 9/16/2025 Posts: 22710 Rating: (3071)	Hello, which parameters are used? IP and Port on SIMOTION side? IP and Port on PLC side? The error means only thats the communication partner (PLC?) don't accepted the connection request from SIMOTION. Regards Christoph

Suggestion To thank Quote Answer

4/17/2008 9:48 AM	Rate (0)
llsl0304 Posts: 78 Rating: (0)	hello, simotion: port,2001 ip 169.254.11.22 D425 plc:port,2000 ip 169.254.11.50 i think simotion is connection parter, plc is server. in simotion,use _tcpopenclient, _tcpsend _tcpcloseconnection in plc: AG_receive
llsl0304 Posts: 78 Rating: (0)
Suggestion To thank Quote Answer

4/17/2008 11:00 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 9/16/2025 Posts: 22710 Rating: (3071)	Hello, which plc you use? Regards Christoph

Suggestion To thank Quote Answer

4/17/2008 11:30 AM	Rate (0)
llsl0304 Posts: 78 Rating: (0)	someone tell me thatit ishelpful to switch with rise . plc: 315-2dp+ cp343-1
llsl0304 Posts: 78 Rating: (0)
Suggestion To thank Quote Answer

4/18/2008 6:58 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 9/16/2025 Posts: 22710 Rating: (3071)	Hello, have you the connection projected as described in the communication system manual of SIMOTION? I have make it and it works fine. Regards Christoph

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on