How do I know the status of the PLC, in a IPC677D?

thank you.

Hello,

which HMI Software you have running on the IPC?
And Which PLC do you use?

regards

Christoph

Hi,

can you provide the exact installed Packages ? (Help -> installed Software -> detailed Informations)
The function in the link from you can also be used with WinCC RT Advanced V13, if you use this for the HMI on you IPC follow the Steps in the FAQ you liked and it should be work.

regards

Christoph

Attached image

The function in the link from you can also be used with WinCC RT Advanced V13, if you use this for the HMI on you IPC follow the Steps in the FAQ you liked and it should be work.

I'm using Professional. And in connection, has no pointer area.  

in the above example uses it.

Hello,

in the example the area Pointer is used to trigger the function cyclic.

But you an also start this function with a click event on a button.

You should try this.

Regards
Christoph

P.S. On the IPC you haven't install the WinCC RT only the simulation.

ChristophD

Hello,

in the example the area Pointer is used to trigger the function cyclic.

But you an also start this function with a click event on a button.

You should try this.

Regards
Christoph

P.S. On the IPC you haven't install the WinCC RT only the simulation.

I am using as an engineering station, to be delivered to the customer.

no this wax not my idea.

You should try if the function is work with winCC Professional RT without area pointer.

If it works with a single Event (Button click) you can implement a cyclic flag to trigger the function in you wincc RT Prof (with a script ??)

Regards
Christoph

Hello,

Hope your PLC and SCADA project is integrated in single project. If yes then you dont have to check any live bit any script soomthing like that. Under wincc professional screen you will find one Diagnostic control like Stethoscope. Just drag and drop on one screen. Thru this control not only you can the CPU status but also all diagnostic of CPU and its periferal devices.