Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Logo connection with router

Created by: Grefix at: 1/16/2017 7:38 PM (4 Replies)

Rating (0)

Thanks 2

5 Entries

1/16/2017 7:38 PM	Rate (0)
Grefix Posts: 3 Rating: (0)	Hello! Im having a problem with new logo!8 FS4, when i connect it directly to my laptop i can go to whatever ip i put into logo like 192.168.0.50 but if i connect it to router then i cant connect to it. Even the router ipv4 clients list (Inteno router) doesnt find it only shows that LAN 1 or whatever port i use is occupied but no mac or ip in the list.
Grefix Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

1/16/2017 7:46 PM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 12/31/2025 Posts: 36386 Rating: (4545)	What is the IP address of the router?

Suggestion To thank Quote Answer

1/16/2017 7:53 PM	Rate (0)
Grefix Posts: 3 Rating: (0)	Hello, Its 192.168.1.1
Grefix Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

1/16/2017 8:18 PM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 12/31/2025 Posts: 36386 Rating: (4545)	The IP addresses of LOGO !, Laptop and router must be located in the same address space. That is, the first 3 segments must be the same. If the router has the IP address 192.168.1.1, then the laptop and the LOGO! have the following IP addresses: Laptop: 192.168.1.xxx (xxx, e.g., 10) LOGO !: 192.168.1.yyy (yyy, e.g., 11) The subnet mask must be the same for all and should be specified with 225.255.255.0.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Grefix

1/16/2017 8:21 PM	Rate (0)
Grefix Posts: 3 Rating: (0)	Thank you! got it working now!
Grefix Posts: 3 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users ixo65

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on