Simple household light program

I have a Logo 8 (0BA8 Standard) and I am trying to get the following scenario to work:

I have an input (a momentary pushbutton "make") that is connected to an output (a light).

When I simply push (and immediately release) the button, I want it to switch on/off a light. I can accomplish this easily with a Pulse Relay between input and output -> no problem.

However, when I push the button for at least 2 second, I want it to _NOT_ trigger the Pulse Relay, but instead do something else (say switch on/off a different light on a different output).

The only thing I can accomplish right now is that when I keep the button pressed for at least 2 seconds, both the first and the other light are switched on or off. But I cannot seem to program it so that whenever I push it for more then e.g. 2 seconds, the first light is not triggered.

I have messed around with On-Delay, "momentary push button break" but cannot get it to work. It seems such a trivial usecase for me... any ideas?