Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

managing deceleration/Iaccelaration ramp

Created by: sandro53 at: 6/10/2008 12:16 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

6/10/2008 12:16 PM	Rate (0)
sandro53 Posts: 2 Rating: (1)	Hello everybody I have to drive a small step motor , creating deceleration and acceleration ramps. The system is configured like this: a step motor , his drive(0-10V reference), an absolute encoder via profibus, an output analog card for the reference signal. Which would be the best way to create his ramps.
sandro53 Posts: 2 Rating: (1)
Suggestion To thank Quote Answer

6/10/2008 5:39 PM	Rate (0)
Denilson Pegaia Diamond Member Joined: 9/23/2005 Last visit: 12/29/2025 Posts: 4435 Rating: (1487)	Hi, software is something personal, each one like to do in a different way. So, I prefer to use SFC64 to read de elapsed time and with this time basis, mount a FB do generate the ramp. Take a look at http://support.automation.siemens.com/BR/view/en/1853767also.
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on