Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

How i can connect CP1543 with CPU 928B

Created by: tt singh at: 6/9/2008 7:00 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

6/9/2008 7:00 AM	Rate (0)
tt singh Posts: 56 Rating: (1)	Hi any body explain me how i can connect the CP1543 with CPU 928B. and how i can check the logic with step 5 in online mod
tt singh Posts: 56 Rating: (1)
Suggestion To thank Quote Answer

6/11/2008 10:02 AM	Rate (0)
J_Bell Posts: 5822 Rating: (412)	Hello, may I ask if you really talk about a CP 1543, or about the CP 5431 ? The second CP would be one I can talk about... I never heard about the first one. Maybe you post the Order# of the CP you want to talk about. Best regards J_Bell
J_Bell Posts: 5822 Rating: (412)
Suggestion To thank Quote Answer

6/12/2008 5:16 AM	Rate (0)
tt singh Posts: 56 Rating: (1)	Hi J_Bell Sir ,it is my mistake it is CP5431 Sorry, for mistake
tt singh Posts: 56 Rating: (1)
Suggestion To thank Quote Answer

6/12/2008 11:23 AM	Rate (0)
J_Bell Posts: 5822 Rating: (412)	Hello, well... this is a huge field. Maybe you specify what you need in detail. We could start with the SYNC Function in the Startup OBs... or with the COM 5431 Configuration for your PROFIBUS System... or with the SEND / RECEIVE Blocks in the direct form... or in the all form. Did you already read the manual for the CP? I think the most important step and maybe the most difficult one is the configuration of the used PROFIBUS service in COM 5431, did you already try to go online? Have you configured DP, FMS or FDL Services? Best regards J_Bell
J_Bell Posts: 5822 Rating: (412)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on