Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Uploading PLC Program from s7 memory card

Created by: Reymond at: 6/11/2008 11:05 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

6/11/2008 11:05 AM	Rate (0)
Reymond Posts: 112 Rating: (0)	Hi, Good afternoon I need to upload PLC Program using my mery card. I used retrieve from memory card but an error occured that there's no available usb/serial. How can I success uploading from memory card? Thanks and warm regards, Begginer
Reymond Posts: 112 Rating: (0)
Suggestion To thank Quote Answer

6/11/2008 2:44 PM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 12/24/2025 Posts: 9097 Rating: (1202)	Hi Begginer, You can read MMC using Field PG or external prommer. Or when it's in CPU. How are you connected to CPU? Best regards, Wizard

Suggestion To thank Quote Answer

6/12/2008 11:26 AM	Rate (0)
Reymond Posts: 112 Rating: (0)	Hi Wizard, I dont have this usb prommer and I'm only using an ordinary laptop. But I'm able to get an image of the mmc but still I don't still know how to retrieve the program on it. I'm not connected to cpu, all I have is there backup mmc. One more question is the plc will stop during uploading? regards, Begginer
Reymond Posts: 112 Rating: (0)
Suggestion To thank Quote Answer

6/12/2008 4:15 PM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 12/24/2025 Posts: 9097 Rating: (1202)	Hi begginer, It's not possible to read MMC using laptop. Only when you are online with CPU. When you want to upload, the CPU will not go to stop. Only when you want to download hardware configuration. Best regards, Wizard

Suggestion To thank Quote Answer

6/13/2008 4:34 AM	Rate (0)
Reymond Posts: 112 Rating: (0)	Hi, Thanks wizard, I hope in the future siemens provide direct uploading on memory card. Thanks, Begginer
Reymond Posts: 112 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on