Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

How can i check the analog input and out puts by using the simatic manager software

Created by: tt singh at: 7/30/2008 8:33 AM (2 Replies)

Rating (1)

Thanks 0

3 Entries

7/30/2008 8:33 AM	Rate (0)
tt singh Posts: 56 Rating: (1)	Hi Any body can give me the answer according to my question
tt singh Posts: 56 Rating: (1)
Suggestion To thank Quote Answer

7/30/2008 8:51 AM	Rate (1)
Aret Posts: 2348 Rating: (265)	Choose CPU in Step 7 Manger. Then in menu PLC -> Monitor/Modify variables. In appeared window(VAT) type address you are interested in and press "glass" button. Analog signals are usually located outside process image partition.Soaddresswouldbelike PIW 512 (note P letter in the beginning). Unfortunately you can't see outputs this way. You have to write (in OB1 for example) L MW234; T PQW 544. Then you can monitor/modify MW234 and this value would be on PQW544. Another method is to defineanalogsignalsinsideprocessimagepartition -forexamplebyreducingtheiraddress (in HwKonfig).Thiswayyoucansee everythingwithVAT, but without P letter (ex. IW 12 or QW44).
Aret Posts: 2348 Rating: (265)
Suggestion To thank Quote Answer

7/30/2008 9:16 AM	Rate (0)
tt singh Posts: 56 Rating: (1)	thanks a lot
tt singh Posts: 56 Rating: (1)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on