LOGO 8 server web not available

Hello,

I'm new in the forum and open this topic because I have a problem with LOGO! 8 Web server connection.

I have a LOGO!8 FS4 and I configured it using my company internal network.During my internal test everything works well, I can connect to LOGO via software and also Web server.

Now I'm on site with the same LOGO, I changed network data of the LOGO to adapt to the new network. I can connect via network to LOGO via configuration software, the "ping" to LOGO IP address works, but if I "call" LOGO IP from web browser I don't receive any response from the device.

I double check Web server activation mark from the configuration software and it looks ok.

The only things that changed from internal test to on site installation is the network, so I doubt that there could be something here that doesn't allow Web server communication.

Are there any special features that the network as to respect to enable Web server communication?

Thank you very much

Thank you for quick reply,

Here the required data:

LOGO - IP: 192.168.13.100 / NETMASK: 255.255.255.0

PC ON SITE - IP: 192.168.13.50 / NETMASK: 255.255.255.0

What do you mean for LSC ?

Thank you again

Ok,

My LSC version is V8.1.1

Thank you

Also if I connect to LOGO through the corporate network it works. From LSC I can read and write software to LOGO and see the on line test.

The only thing that doesn't work is Web server.

Thanks