Can't add Profibus RF680R

Hello!

I'm having trouble adding a RF680R to my project, it should be connected to an ASM456 which is connected to the Profibus. I even downloaded the programming example (RFID basic examples: SIMATIC RF600 via ASM456) from Siemens website but when I try to Save & Compile the HW-config for the programming example I get the following message:

================================ 02/22/2018 7:57:25 PM ================================
Save and Compile (13:4735): In slave "(10) ASM456" (DP master system 1), you can use a maximum of 4 input bytes and 4 output bytes; their total must not exceed the value 8.
Save and Compile (1230:3000): The system data could not be recreated because the configuration is inconsistent.

I'm using Step 7 V5.5 + SP4 but I'm obvious missing something here, does anyone know what?

Downloaded the newest GSD file for the ASM456 (version 3.11.11) but it will still not add the RF680R.

\Rickard

Is there anyone else who can save and compile the example program in the HW Config with Step 7 V5.5?

https://support.industry.siemens.com/cs/se/en/view/109483366

\Rickard

unpack the example, oben it and compile HWConfig without any error

Use Step7 V5.5 SP4 HF12

Well, it turned out I didn't have the latest GSD file for the ASM456 module installed after all...

Installed version 03.16.00 and now it works like a charm! :)

\Rickard