Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

step7 error 256:91

Created by: Ziemens at: 5/15/2018 11:15 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

5/15/2018 11:15 AM	Rate (0)
Ziemens Gold Member Joined: 3/2/2007 Last visit: 11/19/2025 Posts: 999 Rating: (5)	while trying to download an FC to a Siemens plc CPU315-2DP , we are getting the following error . what does it mean ? how to solve this problem ? note that we are able to go online . thank you Message 256:91 Description of Error: The action was aborted by the user. To Correct or Avoid Error: You can continue working with the program as normal.
	... thank you ...
Suggestion To thank Quote Answer

5/15/2018 11:59 AM	Rate (0)
Towome Platinum Expert Joined: 7/9/2015 Last visit: 12/17/2025 Posts: 4493 Rating: (644)	Hi, first check necessary software products needed for you project - also use function "Save as" with "Reoganisation Slow" and test again - check any messages that may occur.Also do a block-consistency check. https://support.industry.siemens.com/cs/de/en/view/5416540 Regards, Towome
	If my post was useful, please rate me - if not, please tell me - thank you!
Suggestion To thank Quote Answer

5/30/2018 3:31 PM	Rate (0)
Ziemens Gold Member Joined: 3/2/2007 Last visit: 11/19/2025 Posts: 999 Rating: (5)	It worked from another PG ! We were able to download . Why this difference between two laptops for the same project ?
	... thank you ...
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on