Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Read memory area from SFC51

Created by: D'morgan at: 5/30/2018 9:59 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

5/30/2018 9:59 AM	Rate (0)
D'morgan Posts: 22 Rating: (0)	Hello I am trying to get meory area information form SFC51. But I always get error... My PLC CPU is 6ES7315-2AG10-0AB0 Please help me to get memory area information. Thank you Attachment al.PNG (157 Downloads)
D'morgan Posts: 22 Rating: (0)	Last edited by: D'morgan at: 5/30/2018 10:00:48 AM
Suggestion To thank Quote Answer

5/30/2018 1:13 PM	Rate (0)
Duris_I Diamond Member Joined: 4/28/2015 Last visit: 11/27/2025 Posts: 10970 Rating: (843)	Hello, SZL_ID is wrong or is uknown in CPU or SFC.
	With best regards... Ivan Duris Flight: OMICO
Suggestion To thank Quote Answer

5/31/2018 2:12 AM	Rate (0)
D'morgan Posts: 22 Rating: (0)	I know...but why...
D'morgan Posts: 22 Rating: (0)
Suggestion To thank Quote Answer

5/31/2018 8:35 AM	Rate (0)
Duris_I Diamond Member Joined: 4/28/2015 Last visit: 11/27/2025 Posts: 10970 Rating: (843)	Hello, where you get that info about parameters values for your block due your HW specification?
	With best regards... Ivan Duris Flight: OMICO
Suggestion To thank Quote Answer

5/31/2018 9:29 AM	Rate (0)
mopS04 Posts: 5521 Rating: (1058)	hi D´morgan, what CPU do you have exactly? I guess you wanna read out information about work memory and the CPU is not supporting this SZL_ID. hope this helps, regards,
mopS04 Posts: 5521 Rating: (1058)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on